Signs You Need Garage Door Repair Edmond

Signs You Need Garage Door Repair Edmond

Every year, homeowners open and close garage doors about 1,500 times on average, which can lead to wear and tear. That’s why regular maintenance is a must, which will ensure proper running operation of your garage door all year round.

Signs You Need Garage Door Repair Edmond

Power is needed for your garage door transmitter to work. However, if you have dead batteries, the transmitter fails to send a signal for the garage door to open. So what do you need to do? The first thing you can do is inspect if the transmitter still opens your garage door when you press it. Garage door transmitters are usually located on a garage’s inside wall.

Here are a few helpful tips to address a garage door that won’t open:

  • Replace Batteries: Replace the battery of your car transmitter if the garage door opens when you press the transmitter on your garage wall. Also, if you have multiple batteries, you might need to replace everything because you probably installed all of them at the same time.
  • Contact a Service Technician: If replacing the batteries won’t resolve the problem, it’s time to contact a technician to help source and address the problem.


A noisy garage door that squeaks, shrieks, and rattles can be annoying, and it can disrupt rest and sleep most especially at night. It’s also a warning signal that you need the help of a garage door specialist. While garage doors create sound during operations, unusual or seemingly too disruptive noise would warrant professional help.

Here are some tips to make your garage door less noisy:

  • Quiet your garage door by tightening the nuts and bolts on the track and door. Avoid overly tightening it; just ensure it’s snug.
  • Spray lubricants on the top of garage door springs, all-metal rollers, and inside each track, or use oil on the base of the springs.


If your garage door opens but does not seem to close, the photo-eye is probably out of alignment. The photo-eyes is a safety feature or modern garage doors which sends an invisible beam to help detect anything that’s in the path of the garage door every time it closes.

The photo-eyes prevent accidents like automatically closing the garage door on top of something or someone, which may cause damage to property and serious injuries. However, over time, they accumulate dirt, which causes the blockage of the beam light. Eventually, they become misaligned, which causes connection issues too.

Here are some tips when cleaning the photo eyes:

  • Clean the photo eyes gently to avoid scratching them. They are made of glass, like those with a camera lens.
  • Use a soft cloth with a few drops of mild cleaner to wipe away residue or dirt easily.
  • Don’t over saturate the photo eyes because excessive wetness may cause dirt or residue to stick more quickly.
  • Check the photo-eye alignment to ensure it is pointing in the same direction and angle, measuring from the ground. Use a laser level or a regular level to make sure the photo eyes match.

Once you have cleaned and checked the alignment of your garage door, you can test it to make sure it opens and closes without a problem. If the issue persists, it’s time to contact a professional garage door specialist.


Did your…

Leave a Comment

0 Comments Made