Ever since manufacturers produced it, the super glue has been a convenient and efficient sticking material. But of course, its effectiveness depends on how well you use it. There are probably some instances when the super glue does not stick properly.
Chances are, it is taking too long to dry because you are doing it wrong. Worry no more because we will be featuring a step by step process on how to make super glue dry faster for a long-lasting effect.
Why Should You Use Super Glue
Two chemists accidentally discovered super glue in 1951. Since then, it has been the go-to bonding material for most people. By only applying a minimal amount of super glue, many broken elements can get easily mended.
There are a lot of industries that make use of the super glue, such as construction and medicine. As mentioned earlier, the super glue can stick plastic material and metal together. Further, it is a convenient tool for craft-making.
For ordinary individuals, the super glue is suitable for household needs. Accidents often happen at home. Naturally, some items inside the house are knocked over or dropped if you are not careful.
Super glue dries faster than most type of adhesives. However, there are still ways to make it dry faster. The following is a step by step process in allowing a super glue dry more quickly. You can use this procedure for several types of materials.
The first three steps are suitable all kinds of materials that you are sticking. Meanwhile, doing the last two steps will depend on your preference. If you are meticulous, you should do them.
What You’ll Need
- The item(s) that you need to stick together
- Super Glue
- Old cloth (for wood, you can opt to use sandpaper)
- Baking soda
- A fan or a blow dryer
Steps to Follow
We made sure that these guidelines will be very convenient for you. Also, you can find the materials listed above anywhere. You will not have a hard time finding them in a hardware or the grocery.
Remember that you can apply this to different kinds of situation. What matters is that you know what you need to do, and your items are complete and available. That should not be difficult to follow.
Step 1: Prepare all the materials and place them in easy reach
You need to put all the things you need in one place, so you don’t have to look for them in the middle of work. A super glue dries fast. That means that if you leave it exposed, it can dry on the surface without letting the materials stick.
The ones that you need to use immediately should be closer to your hands. Make sure that none of the materials will get in the way of your concentration. If you want, you can wear protective glasses to wear while working.
It is not advisable to wear gloves because the super glue might stick to it. However, if you feel comfortable using more protective gears, then you may do so.
Step 2: Clean the surface of the materials you are sticking together that how to Make Super Glue Dry Faster
Before you can apply the super glue, you must clean the surface of the things first. If there is dirt on the surface, the super glue might not work correctly. The super glue comes from chemicals that may be sensitive to other chemicals.
Some of the things you should look out for are grease, rust, and dirt. For wood, you can opt to use sandpaper to make the surface smoother. However, the easiest way is to clean the surface with damp cloth.
Step 3: Carefully apply the super glue and let it dry
You must only use a small amount of the super glue. Applying too much adhesive may cause it not to stick at all. If the item is short, you need to wait 10 to 30 seconds.
The item can be placed near an electric fan for the super glue to dry fast. You may also use a blow dryer if you want to be more in control. What matters is that the air is at least in low heat.
For other kinds of items, you may do the additional process in Steps 4 and 5.
Step 4: Use a clamp to hold the two materials together
Some elements may need more pressure to be able to stick together. With the aid of the clamps, the super glue from each surface is more in contact. The super glue slowly dries from the are more exposed to air, and then spreads to the center.
Step 5: Pour a small amount of baking soda to the super glue
>The chemicals in the super glue react to the baking soda. Once you pour the baking soda into it, it immediately starts to dry. That is most commonly suitable for significant materials such as soles of shoes, et cetera.
The baking soda speeds up the ability of the super glue to “bond” the materials together. Moreover, it helps in making sure that the bonds are durable enough.
The invention and discovery of super glue brought progress in modern technology. Before, people need to work long hours to fix things. Some would even need experts to do the fixing.
With super glue, you can do the work on your own. You don’t even have to wait long hours for it to dry anymore. As long as you follow these steps, your problems are finally solved!